Upload and Drag Image to the Captured Background For detailed instructions on how to use the Camera Capture feature, see Quick Start Guide. You don't need to set the work origin, and just drag the laser model to where the engraving and cutting will be on the captured background. The laser module's camera captures photos of the work area, and stitch them together as the background. Note 3: For detailed instructions on how to Transfer G-code File to Machine, see 5 Transfer G-code File to Machine.Ģ.2 The Method of Using Camera Capture Feature
Note 2: If the focal length is already measured, skip Measure Focal Length. Note 1: Ensure that you have worn the Laser Safety Goggles before proceeding. The work origin corresponds to the (0, 0) coordinate origin in the software Snapmaker Luban. You need to find out where the engraving and cutting will be by setting the work origin. There are two methods to start laser engraving and cutting: setting work origin or using the Camera Capture feature.
You can also watch the video tutorials on our website to learn how to use the machine.Ģ Two Methods to Start Engraving and Cutting Read the product Quick Start Guide to check the included parts, assemble the machine, and set up the machine for the first use.
Laser Engraving and Cutting 1 Set Up for First Use
